Doughboy pool sizes below This picture is from paul bailey one of our many happy customers
    The
Top of the Range Regent is a new affordable pool with a combination of
resin and steel. Made using
the highest quality materials and technology, the Regent uses the COM-PAC™OVAL
SUPPORT System instead of the buttress side supports used on many of todays
pools.
Therefore making it suitable for the smallest of spaces
These Pools can even be placed INGROUND and finished of with decking
or Patio for a finished inground swimming pool look.
Regent Pool Features:
- 6 inch Resin Top Rails
- 52-Inch (4ft 4in) Pool Wall Depth
- Powerful 1hp Pump
- 16" Sand Filter Unit
- Can be installed Above or In the Ground.
- 20 mil Plain Blue Liner
- Option for 7ft deep end ask for details
- Made in USA
- Option to upgrade to Stainless ladder
- Easy to install
- Comes with everything to get you started !
*FREE SHIPPING WITHIN UNITED KINGDOM!
Doughboy introduces the only above-ground pool range you can actually put IN your backyard! Any size… any terrain… any height!
Doughboy pools will blend perfectly with your backyard! If your ideal backyard includes an in-ground pool but your budget doesn’t allow for it – Doughboy has the solution! Discount Leisure UK sells the only above-ground pool that can be installed completely in the ground ( with Manufacturer Warranty) – giving you that in-ground look for thousands less!
Go from green grass to blue water in only 4 days! Yes, that’s right, it only
takes 4 days to install our inground pools! Our pools are expandable up
to 7 feet deep.
Call International: +44[0]1245 477333 for more details!
|
 Doughboy pools are one the single most adaptable domestic swimming pools on
the market today. Their solid construction means whether you want an above ground
pool or an in ground swimming pool , in this category only Doughboy can offer
you the potential to put your swimming pool into the ground without affecting
your warranty.
You can choose from our 12ft rounds to a massive 41ftx21ft oval (available
on special order). With standard panel depths of standard 52" available
and the option to have add a deep end as well!
To Install a Doughboy Swimming Pool from Discount Leisure UK
When excavating for in the ground or partly inground installation, add about
6 to
12 inches to these dimensions, leaving a space all round the pool approximately
1' wide.
Simply erect the pool according to the manufacturers instructions, as if the
pool
was on the ground. Then fill the pool so that it is completely rigid with water.
Any parts of the pool wall & side support framework that will be buried
should be
coated with a bitumen type paint. This is to protect against scratches exposing
bare metal and leading to corrosion. Be careful not to get any paint near the
liner.
Place sheets of 1" thick polystyrene around the pool wall. This will ensure
that no
cement or sand makes contact with the wall. It will also help to insulate the
pool.
Similar sheets (such as "Jablite") may also be used if desired for
the base of the
pool, between the liner and the ground. Now mix a dry lean mix of sand and
cement, and pour it between the polystyrene and earth around both the curved
ends and the straight sides. If the over dig at the sides would result in too
much
lean mix being needed, you can, if you like, place plywood shuttering along
the
straight sides as shown in the diagram. The sand and cement will set hard in
time, forming an earth retaining wall to eliminate outside pressure damaging
the
structure should the pool need to be emptied. Without it, soil around the pool
could
cave in the sides, once the pressure from the water inside the pool has been
removed. Finally the area around the side supports can be filled with earth.
*Please note that, whilst all our above ground pools come with generous
manufacturers warranties, these will be void if the pool is damaged by incorrect
installation or use, including sinking without a proper earth retaining wall.*
|
Please Check Out Other Doughboy Pools Or Accessory Options: |
|
|
|
| |
